Available Sensors

Remote Temperature Sensor

May be used with all Auto-Alarm Dialer Models for remote temperature monitoring and alarm.

Magnetic Reed Switch - Standard

May be used with all Auto-Alarm Dialer Models to detect any unauthorized entry or intrusion.  Usually installed on doors or windows, the sensor detects opening and closing.  Several switches may be wired in series.

Passive Infra-Red Motion Detector

May be used with all Auto-Alarm Dialer Models to detect movement of warm bodies within a specific area.  Will cause a  closure  signal when motion is detected.  Range or detection covers approximately 50ft² area.  Multiple sensor can be wired to a single input. 

Water Detection Sensor

May be used with all Auto-Alarm Dialer Models to detect the presence of water on a horizontal surface.  Independently powered by internal Lithium batteries. Multiple sensors can be wired to a single input. 

Temperature Alert Sensor

May be used with all Auto-Alarm Dialer Models to monitor the air temperature from -30 ° to 130 °F.  Simply determine the acceptable temperature limits for your application by adjusting the temperature limit arms.  When temperature exceeds the setting, the sensor triggers an alarm.  Can be mounted to any wall or vertical surface.  Multiple sensor can be wired to a single input. 

Humidistat

May be used with all Auto-Alarm Dialer Models to detect too high or too low a humidity level.  Range of the humidstat is 10% to 60% RH.  The sensor causes an alarm when the humidity exceeds or falls below the set limit.  Multiple sensors can be wired to a single input.   

Specifications subject to change without notice.