|
|
|
Wizard Parallel Compressor Control System - Plus 12 Step
ENCLOSURE MODEL NEMA/IP ELECTRICAL POLLUTION # RATING CATEGORY PROTECTION WCC-P12 1 II 2 WCC-P12-4 4x / Ip67 II 3 WCC-P12-PM 1 II 2 NEMA 1 Compliant Enclosure - This enclosure is intended for indoor use only primarily to provide a degree of protection against contact with the enclosed equipment. The enclosure is not designed to provide protection from water or to be placed in a hazardous environment. Mount only in Pollution Level 2 environments, ie. environmentally controlled offices, control rooms, or environmentally controlled machine rooms.DIMENSIONS 12"H x 9.5"W x 5.0"D Nema 1
NEMA 4X Compliant Enclosure - This enclosure is intended for either indoor or outdoor use, 0 to 50 °C, to provide a degree of protection against corrosion, windblown dust and rain, splashing water, and hose directed water.DIMENSIONS 14"H x 15"D x 8.2 "D Nema 4X
NEMA 1 Panel Mount Option - The control and display assemblies must be suitably mounted in an enclosure. The Faceplate may be surface mounted onto a Nema 1 enclosure. The IO Board Assembly must be mounted within an enclosure providing at least Nema 1 protection.
POWER 90 to 250VAC, 50/60 Hz, 2.5 Amps INPUTS (All inputs use unpluggable screw terminals) Two (2) Control Pressure Transducers Suction Pressure, 14.7in Vacuum to 100psig or 0 to 200psig Four (4) Oil Pressure, 0 - 200 psig Head Pressure, 0 - 500 psig Four (4) Configurable Oil Pressure Sensors Four (4) Oil Pressure, 0 - 200 psig or Digital, Oil Pressure Control Switch Input (Dry Contact) Two (2) RTD Temperature Sensors Room 1 - Suction Pressure Reset (SPR) Temperature, 2-wire thermistor, -40 to 150°F Room 2 - Booster Compressor (Satellite) Temperature, 2-wire thermistor, -40 to 150°F One (1) Dry Contact - Defrost Status (AC Shutdown) One (1) Dry Contact - System Shutdown One (1) Receiver-CPR-Surge Vessel Level Indicator - Configurable Digital, 4-20ma, voltage OUTPUTS Twelve SPDT, 1 Form C, 250VAC, 3.15Amp relays OPERATING TEMPERATURE 20ºF - 120ºF OPERATING HUMIDITY 20% - 90% RH, non- condensing ALARMS System Alarms (1 relay) Suction High/Low Oil Pressure Low Head Pressure High/Low Room Temp High/Low Receiver-CPR-Surge Vessel Level Low / Shutdown Receiver Level High / Shutdown System Internal Alarm Conditions DISPLAY 2 lines by 20 characters Alphanumeric LCD with back light KEYPAD 5 tactile key switches: Scroll up, Scroll down, Select/Change, Exit, Force Defrost Start/Advance ALARM INDICATORS LCD DISPLAY Name, description, and current reading of alarming sensor BUZZER Piezo-electric, 90db @10ft, silenceable STROBE LIGHT (Optional) Mounted on top of the housing, activates during any alarm condition.
|
|
Genesis International, Inc. reserves the right to change product specifications and availability without notice. Contact a factory representative for additional information on this and any other products. Copyright © Genesis International Inc. All Rights Reserved. |
